- ChannelConfig - Variable in class com.ftdi.d3xx.FTD3XX.ChipConfiguration
-
Number of channels or pipes.
- CHIP_CONFIGURATION_BATTERYCHARGING_GPIOCONFIG - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Default value for the Battery Charging GPIO config element of the Chip Configuration class
- CHIP_CONFIGURATION_CHANNEL_CONFIG_1 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
1 channel configuration
- CHIP_CONFIGURATION_CHANNEL_CONFIG_1_INPIPE - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
1 channel configuration with only an input endpoint
- CHIP_CONFIGURATION_CHANNEL_CONFIG_1_OUTPIPE - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
1 channel configuration with only an output endpoint
- CHIP_CONFIGURATION_CHANNEL_CONFIG_2 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
2 channel configuration
- CHIP_CONFIGURATION_CHANNEL_CONFIG_4 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
4 channel configuration
- CHIP_CONFIGURATION_FIFO_CLK_100 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Fifo clock 100 MHz
- CHIP_CONFIGURATION_FIFO_CLK_66 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Fifo clock 66 MHz
- CHIP_CONFIGURATION_FIFO_MODE_245 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Fifo mode 245 protocol
- CHIP_CONFIGURATION_FIFO_MODE_600 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Fifo mode 600 protocol
- CHIP_CONFIGURATION_FLASH_ROM_BIT_CUSTOM - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit that indicates if custom configuration is used
- CHIP_CONFIGURATION_FLASH_ROM_BIT_CUSTOMDATA_INVALID - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit that indicates if custom configuration is invalid
- CHIP_CONFIGURATION_FLASH_ROM_BIT_CUSTOMDATACHKSUM_INVALID - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit that indicates if custom configuration checksum is invalid
- CHIP_CONFIGURATION_FLASH_ROM_BIT_GPIO_0 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit that indicates if value of GPIO 0 when GPIOs are used for custom configuration
- CHIP_CONFIGURATION_FLASH_ROM_BIT_GPIO_1 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit that indicates if value of GPIO 1 when GPIOs are used for custom configuration
- CHIP_CONFIGURATION_FLASH_ROM_BIT_GPIO_INPUT - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit that indicates if GPIOs are used for custom configuration
- CHIP_CONFIGURATION_FLASH_ROM_BIT_MEMORY_NOTEXIST - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit that indicates if memory exists
- CHIP_CONFIGURATION_FLASH_ROM_BIT_ROM - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit that indicates if ROM (or FLASH) version
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_DISABLECANCELSESSIONUNDERRUN - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag to disable cancel session underrun in the optional feature element of the Chip Configuration class
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_DISABLEUNDERRUN_INCH1 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag to enable disable underrun for the input endpoint of the 1st channel
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_DISABLEUNDERRUN_INCH2 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag to enable disable underrun for the input endpoint of the 2nd channel
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_DISABLEUNDERRUN_INCH3 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag to enable disable underrun for the input endpoint of the 3rd channel
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_DISABLEUNDERRUN_INCH4 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag to enable disable underrun for the input endpoint of the 4th channel
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_DISABLEUNDERRUN_INCHALL - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag to enable disable underrun for the input endpoint of all the channels
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_ENABLEBATTERYCHARGING - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag to enable battery charging in the optional feature element of the Chip Configuration class
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_ENABLENOTIFICATIONMESSAGE_INCH1 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag to enable notification message for the input endpoint of the 1st channel
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_ENABLENOTIFICATIONMESSAGE_INCH2 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag to enable notification message for the input endpoint of the 2nd channel
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_ENABLENOTIFICATIONMESSAGE_INCH3 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag to enable notification message for the input endpoint of the 3rd channel
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_ENABLENOTIFICATIONMESSAGE_INCH4 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag to enable notification message for the input endpoint of the 4th channel
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_ENABLENOTIFICATIONMESSAGE_INCHALL - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag to enable notification message for the input endpoint of all the channels
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_FLASH_ROM_BIT_CUSTOM - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag that indicates if data is CUSTOM or DEFAULT
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_FLASH_ROM_BIT_CUSTOMDATA_INVALID - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag that indicates if CUSTOMDATA is invalid
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_FLASH_ROM_BIT_CUSTOMDATACHKSUM_INVALID - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag that indicates if CUSTOMDATA checksum is invalid
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_FLASH_ROM_BIT_GPIO_0 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag that indicates status of GPIO 0
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_FLASH_ROM_BIT_GPIO_1 - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag that indicates status of GPIO 1
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_FLASH_ROM_BIT_GPIO_INPUT - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag that indicates if GPIO is used for INPUT for chip configuration
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_FLASH_ROM_BIT_MEMORY_NOTEXIST - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag that indicates if MEMORY does not exist
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_FLASH_ROM_BIT_ROM - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag that indicates if ROM or FLASH is used
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_SUPPORT_DISABLE_CHIP_POWERDOWN - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag to disable USB device power down on unplug if self-powered
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_SUPPORT_ENABLE_BITBANG_MODE - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag that indicates if device is in GPIO bitbang mode
- CHIP_CONFIGURATION_OPTIONAL_FEATURE_SUPPORT_ENABLE_FIFO_IN_SUSPEND - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit flag to enable fifo clock during USB device suspend.
- CHIP_CONFIGURATION_POWER_ATTRIBUTES_REMOTEWAKEUP - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit mask that indicates if remote wakeup is enabled in the power attributes element of the Chip Configuration class
- CHIP_CONFIGURATION_POWER_ATTRIBUTES_SELFPOWERED - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Bit mask that indicates if self-powered is enabled in the power attributes element of the Chip Configuration class
- CHIP_CONFIGURATION_SIZE - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Size of the elements of the Chip Configuration class
- ChipConfiguration() - Constructor for class com.ftdi.d3xx.FTD3XX.ChipConfiguration
-
Instantiates a new Chip configuration.
- ClearNotificationCallback() - Method in class com.ftdi.d3xx.FTD3XX
-
Clears the notification callback set SetNotificationCallback.
- ClearStreamPipe(int) - Method in class com.ftdi.d3xx.FTD3XX
-
Clears streaming protocol transfer for specified pipes.
- Close() - Method in class com.ftdi.d3xx.FTD3XX
-
Close the handle of the opened device.
- com.ftdi.d3xx - package com.ftdi.d3xx
-
- ConfigurationDescriptor() - Constructor for class com.ftdi.d3xx.FTD3XX.ConfigurationDescriptor
-
Instantiates a new Configuration descriptor.
- Constants() - Constructor for class com.ftdi.d3xx.FTD3XX.Constants
-
- CONTROL_TRANSFER_DIR_IN - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Control transfer requesting data to be transferred
- CONTROL_TRANSFER_DIR_OUT - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Control transfer containing data to transfer
- CONTROL_TRANSFER_REC_DEVICE - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Control transfer for device
- CONTROL_TRANSFER_REC_ENDPOINT - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Control transfer for endpoint
- CONTROL_TRANSFER_REC_INTERFACE - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Control transfer for interface
- CONTROL_TRANSFER_REC_OTHER - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Control transfer for others
- CONTROL_TRANSFER_TYPE_CLASS - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Control transfer for Class-specific data
- CONTROL_TRANSFER_TYPE_STANDARD - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Control transfer for Standard-specific data
- CONTROL_TRANSFER_TYPE_VENDOR - Static variable in class com.ftdi.d3xx.FTD3XX.Constants
-
Control transfer for Vendor-specific data
- ControlTransfer(FTD3XX.SetupPacket, byte[]) - Method in class com.ftdi.d3xx.FTD3XX
-
Transmits control data over the default control endpoint.
- ControlTransfer(FTD3XX.SetupPacket, byte[], int) - Method in class com.ftdi.d3xx.FTD3XX
-
Transmits control data over the default control endpoint.
- CreateDeviceInfoList() - Method in class com.ftdi.d3xx.FTD3XX
-
Builds a device information list and returns the number of D3XX devices connected to the system.