This version of FTDI's USB to TTL serial adapter cable uses a 3.5mm audio jack on the serial interface and has it's I/O pins configured to operate at 5V levels.

The TTL-232R-5V-AJ uses a FT232RQ unit which is housed inside the USB ‘A' connector, and is terminated at the end of a 1.8 m (70″”) cable with a 3.5 mm audio jack which provides access to transmit (Tx), receive (Rx), and GND signals.

The TTL-232R-5V-AJ is fully RoHS compliant and is FCC, CE and UKCA approved.

The post TTL-232R-5V-AJ first appeared on FTDI.

The post TTL-232R-5V-AJ appeared first on FTDI.

The TTL-232R uses a FT232RQ IC which is housed inside the USB ‘A' connector, and is terminated at the end of a 1.8 meter cable with a 0.1″” pitch header socket which provided access to transmit (Tx), receive (Rx), RTS#, CTS#, Vcc (5V), and GND.

The TTL-232R-5V is fully RoHS compliant and is supplied loose – packed in an anti-static bag. It is FCC, CE and UKCA approved.

The post TTL-232R-5V first appeared on FTDI.

The post TTL-232R-5V appeared first on FTDI.

This version of FTDI's USB to TTL serial adapter cable uses a 3.5mm audio jack on the serial interface and has it's I/O pins configured to operate at 3.3V levels.

The TTL-232R-3V3-AJ uses a FT232RQ unit which is housed inside the USB ‘A' connector, and is terminated at the end of a 1.8 m (70″”) cable with a 3.5 mm audio jack which provides access to transmit (Tx), receive (Rx), and GND signals.

The TTL-232R-3V3-AJ is fully RoHS compliant and is FCC, CE and UKCA approved.

The post TTL-232R-3V3-AJ first appeared on FTDI.

The post TTL-232R-3V3-AJ appeared first on FTDI.

The TTL-232R-3V3-2mm uses a FT232RQ IC which is housed inside the USB ‘A' connector, and is terminated at the end of a 1.8 meter cable with a 2mm pitch header socket which provides access to transmit (Tx), receive (Rx), RTS#, and CTS#. These lines all operate at 3.3V levels. Also brought out on the header are Vcc (5V), and GND.

The TTL-232R-3V3 is fully RoHS compliant and is supplied loose – packed in an anti-static bag. It is FCC, CE and UKCA approved.

The post TTL-232R-3V3-2MM first appeared on FTDI.

The post TTL-232R-3V3-2MM appeared first on FTDI.

The TTL-232R-3V3 uses a FT232RQ IC which is housed inside the USB ‘A' connector, and is terminated at the end of a 1.8 meter cable with a 0.1″” pitch header socket which provided access to transmit (Tx), receive (Rx), RTS#, and CTS#. These lines all operate at 3.3V levels. Also brought out on the header are Vcc (5V), and GND.

The TTL-232R-3V3 is fully RoHS compliant and is supplied loose – packed in an anti-static bag. It is FCC, CE and UKCA approved.

The post TTL-232R-3V3 first appeared on FTDI.

The post TTL-232R-3V3 appeared first on FTDI.

Using the FT232R chip combined with an RS422 level converter, the cable is CE, FCC and UKCA approved product which is one of the simplest USB – RS422 solutions around.

Powered from the USB port, the RS422 signals are exposed on unterminated wires allowing the user to fit an appropriate connector matching their system needs.

The cable can be used with FTDI's drivers to provide a virtual COM port on a PC which is capable of communication rates with RS422 units from 300 baud up to 3 MBaud.
Data RX and TX LEDs visible through transparent moulding

cable colour: black

The post USB-RS422-WE-1800-BT first appeared on FTDI.

The post USB-RS422-WE-1800-BT appeared first on FTDI.

All cables feature an FTDI FT232R device integrated within the cable USB type ‘A’ connector, which provide access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections.  All cables are fully RoHS compliant and are FCC, CE and UKCA approved.

The post TTL-232R-5V-PCB first appeared on FTDI.

The post TTL-232R-5V-PCB appeared first on FTDI.

All cables feature an FTDI FT232R device integrated within the cable USB type ‘A’ connector, which provide access to UART Transmit (Tx), Receive (Rx), RTS#, CTS#, VCC (5V) and GND connections.  All cables are fully RoHS compliant and are FCC, CE and UKCA approved.

The post TTL-232R-3V3-PCB first appeared on FTDI.

The post TTL-232R-3V3-PCB appeared first on FTDI.

Features:

• Entire USB protocol handled by the electronics encapsulated in USB connector.
• Data transfer rates from 300 baud to 1 Mbaud.
• Extended temperature range (-40oC to +85oC).
• Fully assisted hardware (RTS#/CTS#) or X-On/ X-Off software handshaking.
• Additional voltage output level is 0v
• CE, FCC and UKCA approved.

The post USB-RS232-PCB first appeared on FTDI.

The post USB-RS232-PCB appeared first on FTDI.

Using the FT232R chip combined with an RS232 level converter, the cable is CE, FCC and UKCA approved product which is one of the simplest USB – RS232 solutions around.

Powered from the USB port, the RS232 signals are exposed on unterminated wires allowing the user to fit an appropriate connector matching their system needs.

The cable can be used with FTDI's drivers to provide a virtual COM port on a PC which is capable of communication rates with RS232 units from 300 baud up to 1 MBaud.

Data RX and TX LEDs visible through transparent moulding
5V0 supply output
cable colour : black

The post USB-RS232-WE-5000-BT_5.0 first appeared on FTDI.

The post USB-RS232-WE-5000-BT_5.0 appeared first on FTDI.