-
×
TTL-234X-5V
1 × USD20.20 -
×
USB-RS232-WE-1800-BT_0.0
1 × USD25.80 -
×
UMFT200XD-01
1 × USD10.80
Products
Part No: FT200XD
USB Full Speed to I2C IC with USB Charger Detection, DFN-10
USB to I2C slave interface
Standard Price (Easy checkout)
| Order Quantity | Price per Unit | |
| 1 - 24 | : | USD2.17 |
| 25 - 99 | : | USD2.10 |
| 100 - 249 | : | USD2.04 |
| 250 - 499 | : | USD1.85 |
| 500 - 999 | : | USD1.68 |
| 1000 - + | : | Ask for quote |
| Old datecode available, - please email sales1@ftdichip.com | : | Ask for quote |
*Request quote for large quantities
Login
Register
FT200XD – Full Speed USB to I2C Bridge in 10 pin DFN package
This USB2.0 Full Speed IC offers a compact bridge to I2C devices. The device is an I2C slave, capable of operating up to 3.4MBit/s, with low power consumption (8mA). The FT200XD includes the complete FT-X series feature set and enables USB to be added into a system design quickly and easily over an I2C interface.
Key Hardware Features
- Single chip USB to I2C interface.
- Entire USB protocol handled on the chip. No USB specific firmware programming required.
- Fully integrated 2048 byte Multi-Time-Programmable (MTP) memory for storing device descriptors and CBUS I/O configuration.
- Fully integrated clock generation with no external crystal required plus optional clock output selection enabling a glue-less interface to external MCU or FPGA.
- 512 byte receive buffer and 512 byte transmit buffer utilizing buffer smoothing technology to allow for high data throughput.
- FTDI’s royalty-free Virtual Com Port (VCP) and Direct (D2XX) drivers eliminate the requirement for USB driver development in most cases.
- Configurable CBUS I/O pin.
- Battery Charger detection. May be used by mobile devices to detect the presence of a charger on the USB port for higher current / faster charging of batteries.
- Device supplied pre-programmed with unique USB serial number.
- Supports bus powered, self powered and high-power bus powered USB configurations.
- Integrated +3.3V level converter for USB I/O.
- True 3.3V CMOS drive output and TTL input.
- (Operates down to 1.8V with external pull ups and is also 5V tolerant)
- Configurable I/O pin output drive strength.
- Integrated power-on-reset circuit.
- Internal 3.3V/1.8V LDO regulators
- Low operating current of 8mA (typical) and USB suspend current of 125uA (typical) current.
- Low USB bandwidth consumption.
- UHCI/OHCI/EHCI host controller compatible.
- USB 2.0 Full Speed compatible.
- Extended operating temperature range: -40°C to 85°C.
- Compact Pb-free 10 Pin DFN package (RoHS compliant
Package
Partial, Tray or Reel
| Part No: | FT200XD (qty 1-489) | Package Type: | Partial (Cut Tape) |
| Part No: | FT200XD-T (qty 490-4999) | Package Type: | TRAY |
| Part No: | FT200XD-R (qty >=5000) | Package Type: | REEL |
Typical Applications
- Provide USB port to Microcontroller systems
- No need to decompose system software, insert USB, and re-validate
- Motherboard and system monitoring through USB
- Enable download capability from PC Host systems
- Provide USB port to FPGA’s
- Detecting the presence of USB charging ports for enabling high current battery charging.
Datasheet
| Number | Title | Revision | Relevant Devices |
| FT200XD Datasheet | 1.7 |
Technical Notes
| Number | Title | Revision | Relevant Devices |
| TN_136 | FT201X Errata Technical Note | 1.4 |
Development/Evaluation Kit
| Item Code | Comments | Datasheet | |
|---|---|---|---|
|
UMFT200XD-01 | breakout module - smaller format | Datasheet |
